Yamaha Motorcycle Aerosol Cans

$32.99
/

Yamaha motorcycle colors

All colors will come as "Standard" Shade unless stated. Other shades available on request.

  • Vivid Purplish Blue Cocktail 5 - Paint code 1177
  • Ocean Depth - Paint Code 996
  • Green
  • Red - Paint Code 4XV
  • White - Three Stage color. Price will include Base color and mid coat.
  • Bright Red - Paint Code 63-8880-1
  • Purple
  • Genesis Black - Paint Code BL2
  • Lava Red - Paint Code DRMK - Three Stage color. Price will include Base color and mid coat.
  • Dark Purplish Blue - Paint Code 996
  • Blue/Black
  • Cream - Three Stage color. Price will include Base color and mid coat.
  • Dark Brown
  • Green
  • Gold - Paint Code 625/DRYC1 Three Stage Color. Price includes Base color and mid coat.
  • Dark Blue - Paint Code 52-2086-0
  • Brown - Paint Code 54-9610-5
  • Dark Grey - Paint Code 60-5865-9
  • Bright Red - Paint Code 63-8880-1
  • Beige - Paint Code Y4H
  • Blueish White Pearl - Paint Code 0390 Three Stage color. Price will include Base color and mid coat.
  • Dragster Blue
  • Silber - Paint Code 2F
  • Smoke Grey - Paint Code DNM8
  • Orange (SZR600) - Three Stage color. Price will include Base color and mid coat.
  • Red Pearl R1/R6 - Three Stage color. Price will include Base color and mid coat.
  • Red Yellowish Cocktail - Paint Code RYC1 Three Stage color. Price will include Base color and mid coat.
  • Deep Red - Paint Code 0918 Three Stage color. Price will include Base color and mid coat.
  • Vivid Orange - Paint Code 0552

Colours will dry to a flat finish and will require a 2K Clearcoat.

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

  • Always check color and spray test panels before spraying your product or project.
  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Shake Custom Aerosol Cans for 3-5 minutes.
  • Apply 2-4 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat..
  • Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

Application for 3 Stage colors:

  • Always check color and spray test panels before spraying your product or project.
  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Shake Custom Aerosol Cans for 3-5 minutes.
  • Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
  • Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat.
  • Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

 

Metal Flake Application: "Dry Flake"

Apply our  Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Base coat.
  • Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
  • Apply the 1 - 5 coats of Metal Flake until you get the effect you desire. 
  • Apply a Clearcoat until the Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

  • Always spray test panels before spraying your product or project.
  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
  • Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
  • Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
  • Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
  • Leave 60 minutes before applying a 2k Clearcoat.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed