This is the Specialist Paints part of the site
5 products
![2K Matte Clear](http://usa.specialistpaints.com/cdn/shop/products/2KMattegallon_{width}x.jpg?v=1674576136)
![2K Matte Clear](http://usa.specialistpaints.com/cdn/shop/products/2KMattequart_{width}x.jpg?v=1674576139)
![2K Diamond Show Clear](http://usa.specialistpaints.com/cdn/shop/files/2k_diamond_gall_{width}x.jpg?v=1721845821)
![2K Diamond Show Clear](http://usa.specialistpaints.com/cdn/shop/files/DiamondClearQuart_{width}x.jpg?v=1721140912)
![2K Speed Clear](http://usa.specialistpaints.com/cdn/shop/files/2k_speed_gall_{width}x.jpg?v=1721845871)
![2K Speed Clear](http://usa.specialistpaints.com/cdn/shop/files/2K_Quick_Clear_60b74900-6d4c-49e0-a70c-a608c01cb4be_{width}x.jpg?v=1721150812)
2K Matte Clear
Regular price $54.95 Save $-54.95The mixing ratio:
1 Gallon 2K Matte Clear Kit: Total Mix - 1.5 Gallons of Clear-coat.
1 Quart 2K Matte Clear Kit: Total mix - 1.5 Quarts of Clear-coat.
2K Diamond Show Clear
Regular price $59.99 Save $-59.992K Diamond Clear is a Premium High Solids Urethane Clear coat is a high solid clear coat formulated to provide easy application, easy polishing, and long pot life. 2K Diamond Clear offers an excellent high gloss finish, great flow and anti-sagging properties. 2K Diamond Clear is suitable for all top-quality overall, spot and panel finishes. This clear coat resists shrinkage and die back, and retains its glossy appearance whether baked or air-dried. And with advanced UV filters and absorbers, your finishes keep their beauty longer.
The mixing ratio:
1 Gallon 2K Diamond Clear Kit: Total Mix - 1.5 Gallons of Clear-coat.
1 Quart 2K Diamond Clear Kit: Total mix - 1.5 Quarts of Clear-coat.
SURFACE PREPARATION:
EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.
FLASH / DRYING TIMES:
AIR DRY |
FORCE DRY |
INFRARED DRY |
Flash between coats: After First Coat = 10-15 minutes After Second coat = 15-20 minutes Out of Booth: 30—60 minutes (depending on temperature)
|
Purge time: 15 minutes. Cycle Time: 40 minutes @ 140ºF/60ºC metal temperature. Dust Free: After full cool down. |
Refer to the infrared manufacturer’s guide for setup recommendations. |
Dry and cure times are dependent on air movement, temperature and film builds.
RECOATING:
2K Diamond Clear may be repaired and recoated after 12-24 hours at 70° F/21° C. 2K Show Clear may be repaired and recoated when force dried after 1 hour cool down.
EQUIPMENT CLEANING:
Clean equipment immediately after use according to local regulations.
POLISHING:
Air Dry: After 24 hours
Force Dry: 1 hours after cool down.
Sanding: Use 2000 grit wet or finer. Or use 2000 DA or finer.
Compounding: Use finishing compound. Apply a thin ribbon of material to the area to be polished. Use a double-sided wool polishing pad or a foam pad. Maintain air polisher or variable speed buffer at 1800-3000 rpm. Remove excess finishing compound with a clean, soft cloth prior to applying finishing polish.
2K Speed Clear
Regular price $220.99 Save $-220.99The mixing ratio:
1 Gallon 2K Speed Clear Kit: Total Mix - 1.5 Gallons of Clear-coat.
1 Quart 2K Speed Clear Kit: Total mix - 1.5 Quarts of Clear-coat.
SURFACE PREPARATION:
EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.
Dry and cure times are dependent on air movement, temperature and film builds.
RECOATING:
2K Speed Clear may be repaired and recoated after 12-24 hours at 70° F/21° C. 2K Show Clear may be repaired and recoated when force dried after 1 hour cool down.
EQUIPMENT CLEANING:
Clean equipment immediately after use according to local regulations.
POLISHING:
Air Dry: After 24 hours
Force Dry: 1 hours after cool down.
Sanding: Use 2000 grit wet or finer. Or use 2000 DA or finer.
Compounding: Use finishing compound. Apply a thin ribbon of material to the area to be polished. Use a double-sided wool polishing pad or a foam pad. Maintain air polisher or variable speed buffer at 1800-3000 rpm. Remove excess finishing compound with a clean, soft cloth prior to applying finishing polish.
1K Clear Coat Pen
Regular price $10.50 Save $-10.50Dont miss out on our New Colors/Effects coming soon! also dont miss out on the latest promotional offers by signing up.