TVR Paint colors
Custom Paints Ltd can offer a large range of colors for the TVR.
We can offer the hardest to find TVR paints colors !! If you unable to find your color, please call us to with the paint code and the name of the color.
All colors will come as "Standard" Shade unless stated. Other shades available on request.
TVR Chameleon colors: Best applied over black base coat
| TVR Chameleon Green | TVR Chameleon Orange |
TVR Reflex colors: Best applied over black base coat
| TVR Reflex Spice | TVR Reflex Burnt Olive | Reflex Charcoal - TVR 0015 |
| TVR Reflex Green | Reflex Purple - TVR 0013 |
TVR Spectraflair colors: (Made to TVR Strengh) Best applied over light gray base coat.
| TVR Spectraflair Silver | TVR Spectraflair Black | TVR Spectraflair Topaz |
TVR Nebula colors: Will Require black or blue base coat
| Nebula Black - TVR 111 | Nebula Blue - TVR 112 | Nebula Dusk - TVR 114 |
TVR Cascade colors: (Made to TVR Strength) Best applied over black base coat
| TVR Cascade Violet | TVR Cascade Green | TVR Cascade Purple |
| TVR Cascade Gold | TVR Cascade Indigo | TVR Cascade Copper |
Other TVR Colours:
This color will dry to a flat finish and will require a 2K Clear coat.
1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.
Paint Application
Application for 2 Stage colors:
- Always check color and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing.
- Mix base coat 1-1 with Reducer and stir well.
- Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
- Leave 45-60 minutes to ensure it's fully flashed off before applying the Clearcoat.
- Leave 60 minutes before applying 2K Show Clear.
- Apply our 2K Show Clear for a Real Deep Gloss finish.
Application for 3 Stage colors:
- Always check color and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing.
- Mix base coat 1-1 with Reducer and stir well.
- Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
- Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
- Mix mid coat 1-1 with Reducer and stir well.
- Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
- Leave 60 minutes before applying 2K Show Clear.
- Apply our 2K Show Clear for a Real Deep Gloss finish.