Outrageous Colors

$60.00
/

Important Notice!! Outrageous coatings line have now been discontinued by the manufacturer. Custom Paints Inc have matched a lot of the Outrageous effect colors. When ordering this color, you will be receiving a Custom Paints Inc version. We do not sell Outrageous coatings. Pease contact us if you have any questions before ordering. We offer Premium Quality at Amazing Pricing!!

For best performance use Custom Paints Reducer and Mix 2-1

Outrageous Shock Waves Colors:

    • Bondi Beaches ( Requires Blue Waves Base Coat )
    • Daytona Beaches ( Requires Mint Base Coat )
    • Key West ( Requires Blue Waves Base Coat )
    • Miami Pink ( Requires Pink Base Coat )
    • Purple Surfer ( Requires White Base Coat )
    • Tobago Bay ( Requires Mint Base Coat )

    Outrageous Shock Waves CANZ:

    Outrageous Shock Waves is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

    To get the best result from Outrageous CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

    Application:

    • Always spray test panels before spraying your product or project.
    • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
    • Mix Ground Coat 2-1 with Reducer and stir well.
    • Apply 2-3 coats of Ground Coat leaving 10-15 minutes between coats. Leave 30 minutes before applying effect color.
    • Mix Pearl Midcoat 2-1 with Reducer and stir well.
    • Apply 2-4 coats of Midcoat depending on the effect you desire. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
    • Apply 2K Show Clear for a Real Deep Gloss finish.

    Metal Flake Application: "Dry Flake"

    Apply our  Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

    Always spray test panels before spraying you product or project to see the effect you desire.

    • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
    • Apply 2-3 coats of Base coat.
    • Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
    • Apply the 1 - 5 coats of Metal Flake until you get the effect you desire. 
    • Apply a Clearcoat until the Metal Flake is fully covered.

    Metal Flake Fx Application: "Paint"

    METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

    • Always spray test panels before spraying your product or project.
    • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
    • Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
    • Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
    • Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
    • Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
    • Leave 60 minutes before applying a 2k Clearcoat.

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    You may also like

    Recently viewed