Ford: Performance Blue - Paint Code FM (2018 Onwards)
This color is best used over a dark grey primer.
All colors will come as "Standard" Shade unless stated. Other shades available on request.
All automotive paint colors require mixing 1-1 with Reducer.
This color will dry to a flat finish and will require a 2K Clear coat.
1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.
Paint Application
Application for 2 Stage colors:
- Always check color and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing.
- Mix base coat 1-1 with Reducer and stir well.
- Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
- Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
- Leave 60 minutes before applying 2K Show Clear..
- Apply our 2K Show Clear for a Real Deep Gloss finish.
Application for 3 Stage colors:
- Always check color and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing.
- Mix base coat 1-1 with Reducer and stir well.
- Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
- Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
- Mix mid coat 1-1 with Reducer and stir well.
- Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
- Leave 60 minutes before applying 2K Show Clear.
- Apply our 2K Show Clear for a Real Deep Gloss finish.