Ford Aerosol Can Colors
Ford automotive colors
All colors will come as "Standard" Shade unless stated. Other shades available on request.
- Ford Ultimate Green - Paint Code: 9GFE5ZA Three Stage color. Price will include Base color and mid coat.
- Ford Electric Orange - Paint Code: 6FSE5ZA Three Stage color. Price will include Base color and mid coat.
- Ford Sterling Gray - Paint Code UJ
- Ford Green Envy - Paint Code HD
- Ford Oxford White - Paint Code Z1
- Ford Race Yellow - Paint Code M6434A
- Ford Sonic Blue - Paint Code M7095A
- Ford Kona Blue - Paint Code L6
- Ford Magnetic - Paint Code J7
- Ford Blue Candy - Paint Code Z9
- Ford Ruby Red - Paint Code RR Three Stage color. Price will include Base color and mid coat.
- Ford Triple Yellow - Paint Code H3
- Ford Race Red - Paint Code PQ
- Ford Ingot Silver - Paint Code UX
- Ford Competition Orange - Paint Code M7117A
- Ford Poppy Red - Paint Code 3
- Ford Emberglo - Paint Code V
- Ford Azure Blue - Paint Code L5
- Ford Lava Red - Paint Code VZ
- Ford Grabber Blue - Paint Code CI
- Ford Tuxedo Black - Paint Code UH
This color will dry to a flat finish and will require a 2K Clear coat.
1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.
Paint Application
Application for 2 Stage colors:
- Always check color and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Shake Custom Aerosol Cans for 3-5 minutes.
- Apply 2-4 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat..
- Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.
Application for 3 Stage colors:
- Always check color and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Shake Custom Aerosol Cans for 3-5 minutes.
- Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
- Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat.
- Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.
Metal Flake Application: "Dry Flake"
Apply our Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.
Always spray test panels before spraying you product or project to see the effect you desire.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Base coat.
- Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
- Apply the 1 - 5 coats of Metal Flake until you get the effect you desire.
- Apply a Clearcoat until the Metal Flake is fully covered.
Metal Flake Fx Application: "Paint"
METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.
- Always spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
- Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
- Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
- Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully
- Leave 60 minutes before applying a 2k Clearcoat.