Kustom Canz Spectrum FX
Spectrum FX CANZ:
Specialist Paints award winning Coatings are now available in a Aerosol Can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time & labor with no paint mixing or Spray gun cleaning. The CANZ range comes in a 13.5oz Aerosol can.
Spectrum FX Colors:
Spectrum FX Custom paints are based on a unique pigment that sparkle and shimmer through the light spectrum when viewed from different angles, rounded curved surfaces and sharp angles will highlight the magical appearance of Rainbow XL.
Available in Silver
Application:
Spectrum FX coatings are easy to apply and for best results use a Black base coat but using different colors will give you a real custom effect. Spectrum FX CANZ colors can also be applied over our other Candy, spectracoat, Sparkle, flip paint to get true custom effect.
(Always spray test panels before spraying you product or project)
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Shake Custom Aerosol Can for 5-10 minutes.
- Apply 2-3 coats of base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Spectrum FX effect color.
- Apply 1-4 coats depending on the Spectrum FX effect you desire. Leave 5-10 minutes between coats.
- For best results we suggest to apply our 2K Clear-coat Aerosol CANZ
Metal Flake Application: "Dry Flake"
Apply our Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.
Always spray test panels before spraying you product or project to see the effect you desire.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Base coat.
- Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
- Apply the 1 - 5 coats of Metal Flake until you get the effect you desire.
- Apply a Clearcoat until the Metal Flake is fully covered.
Metal Flake Fx Application: "Paint"
METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.
- Always spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
- Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
- Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
- Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully
- Leave 60 minutes before applying a 2k Clearcoat.