Kustom Canz Spectracoat

$22.00
/

Spectracoat Aerosol Cans:

Our award winning Spectracoat are available in a Aerosol can. Our Aerosol cans give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our aerosol cans saves you time & labor with no paint mixing or Spray gun cleaning.

To get the best result from our Spectracoat aerosol cans we recommend using our 2K CLEAR-COAT CANZ.There the best 2k aerosol can on the market!!

Spectracoat is a Prismatic tidal wave which creates alluring 3D iridescent colors that appear to move right before your eyes! Spectracoat looks like liquid silver in low light and a flowing liquid silver rainbow in bright light. rounded curved surfaces and sharp angles will highlight the magical appearance of Spectracoat. ( flip paint )

Spectracoat colors:

  • Spectracoat Silver.
  • Spectracoat Pink.
  • Spectracoat Blue.
  • Spectracoat Purple.
  • Spectracoat Green.
  • Spectracoat Black.
  • Spectracoat Light Pink.
  • Spectracoat Light Blue.
  • Spectracoat Light Purple.
  • Spectracoat Light Green.
  • Spectracoat Gunmetal.
  • Spectracoat Gold.
  • Spectracoat Red
  • Spectracoat Yellow.

 

 

Spectracoat Application:

Spectracoat are easy to apply and can even be applied by a airbrush. Apply a Spectracoat over any color base coat. Spectracoat colors can also be mixed with our other products i.e. Candy, Sparkle Pearl, Pearl, flip paint for a real custom effect.

(Always spray test panels before spraying you product or project)

  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Shake Custom Aerosol Can for 3-5 minutes.
  • Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Spectracoat color or Clear-coat.
  • For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Metal Flake Application: "Dry Flake"

Apply our  Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Base coat.
  • Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
  • Apply the 1 - 5 coats of Metal Flake until you get the effect you desire. 
  • Apply a Clearcoat until the Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

  • Always spray test panels before spraying your product or project.
  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
  • Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
  • Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
  • Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
  • Leave 60 minutes before applying a 2k Clearcoat.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed