Wizards Polishes
Finish Cut™
No Swirls Compound
Part No. 11040, 32 oz
- No swirls, easy clean up.
- Levels and removes scratches on paint and clear coat, fresh or aged finishes.
- One step buffing on most colors and clear coat, fresh or aged finishes.
- Brightens dull finishes and removes heavy paint overspray.
- Finish buffs to a high gloss.
- No wax, silicone or crystalline silica.
- Water-based, no staining, etching, or dusting.
- Protect with Shine Master™ #11033.
- Use with the WIZARDS® Buffing Pad System™
- Marine use: Exterior defect removal on gelcoat, paint, fiberglass. Removes swirls and minor scratches on average surfaces.
Turbo Cut™
Time Release™ Compound
Part No. 11044, 32 oz
- Fast cut on dead paint, gelcoat and fiberglass.
- Removes 1200 grit or finer sand scratches.
- High gloss finishing on fresh or aged, single stage paint and clear coat.
- No wax, silicone or crystalline silica.
- Non-greasy, water-based for easy clean up without staining.
- Follow up with Finish Cut™ #11040, using pad #11204, then protect with Shine Master™ #11033.
- Marine use: Exterior defect removal on gelcoat or neglected fiberglass.
Mystic Polish™
Smart Abrasive Technology™ Machine Glaze
Part No. 11047, 32 oz
- Exclusive “Nano-Sphere Technology” incorporates latest Nano abrasives.
- Use as a stand alone polish or the final step in the buffing process.
- Quickly removes swirls, light scratches, spider webbing and mild imperfections.
- No wax, silicone or crystalline silica.
- Safe for all paints.
- Apply by hand or machine.
* Follow with Shine Master™ Polish & Breathable Sealant for long lasting protection.
Metal Flake Application: "Dry Flake"
Apply our Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.
Always spray test panels before spraying you product or project to see the effect you desire.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Base coat.
- Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
- Apply the 1 - 5 coats of Metal Flake until you get the effect you desire.
- Apply a Clearcoat until the Metal Flake is fully covered.
Metal Flake Fx Application: "Paint"
METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.
- Always spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
- Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
- Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
- Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully
- Leave 60 minutes before applying a 2k Clearcoat.
