Description:

Reducer is a high quality Reducer for our base colors and effect colors.

Storage:

Shelf life 12 months. Highly Flammable liquid, store and use in accordance with the flammable liquid regulations.

Description:

SILVER COARSE METALLIC RECOMMENDED AS BASE COLOR!

Candy brings you the ultimate custom finish. Candy can be applied over any color Basecoat, but for your own custom color can be applied over our Pearls, Liquid, Rainbow XL, etc.

Candy can easily be faded into each other but also intermix to create your very own custom color.

For best performance use Custom Paints Reducer and Mix 2-1

Candy Colors:

• Black Candy
• Blue Candy
  
• Blueberry Candy 
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy 
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTV's PIMP MY RIDE UK for Series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

Candy CANZ:

Our award winning Candy is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Candy CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Candy coatings are easy to apply and can even be applied with an airbrush. For best results use a (Coarse) Silver Basecoat, but using different colors will give you a different effect. Candy Colors can also be mixed with our other products: Pearl, Spectracoat, Sparkle Pearl, Flip Paint, etc. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Candy 2-1 with Reducer and stir well.
• Apply 3-6 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats, the more deep and richer the color will become. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Our High Performance Base Colors are intermixable to create thousands of base colors. Base Colors can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

For best performance use Custom Paints Reducer and Mix 2-1

Base Colors:

• Black Base 
• Blue Lagoon Base
• Blue Waves Base
• Brown Base
• Clearwater Base
• Cotton Candy Base
• Dark Blue Base
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base
• Green Base
• Lemon Base
• Lemon Drop Base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Lilac Base
• Mint Green Base
• Mustard Base
• Orange Base
• Peppermint Base
• Pink Base
• Red Base
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base
• Slime Green Base
• White Base
• Yellow Ochre Base

Base CANZ:

Our Base Colors are now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Base CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Colors are easy to apply and can even be applied with an airbrush.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix Basecoat 2-1 with Reducer and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats. 
• Apply any effect color or 2K Show Clear for a Real Deep Gloss finish.

Description:

Custom Paints Direct to Metal (DTM) Primer. VOC 2.1
2K DTM Primer-Surfacer with exceptionally high build and direct-to-metal properties. Very soft sanding, wet or dry after short dry times. 2K DTM Primer provides no shrinkage and the maximum in color holdout properties available.

Available in 3 colors: grey, white and black which can be blended to make different shades of grey. Suitable for: Car, Motor bike, Caravan, Commercial Vehicle and industrial industry. TYPICAL SUBSTRATES: ▪ OEM primer ▪ GRP / fibreglass ▪ Epoxy primer surfacer ▪ Polyester putties ▪ Existing finishes in good condition ▪ Etch primer

Substrates:

2K DTM High Build Primer can be used on the following substrates

• Metal
• Galvanized
• Aluminium
• OEM primer
• GRP / Fiberglass
• Body Filler
• Polyester putties

Mixing:

The mixing ratio for 2K DTM High Build Primer:

• 4 parts 2K DTM High Build Primer
• 1 part DTM Activator

The mixing ratio for 2K DTM Sealer:

• 4 parts 2K DTM High Build Primer
• 1 part DTM Activator
• 1 Part 2K Reducer

2K DTM Primer includes:

2K High Build Primer 1 Quart:

• 1 Quart High Build Primer.
• 1/2  Pint Activator.

2K High Build Primer 1 Gallon:

• 1 Gallon 2K DTM High Build Primer.
• 1 Quart DTM Activator.

SURFACE PREPARATION:

Clean and dry the surface. Sand surface with P220—P380 grit abrasive.

MIXING:

4 Parts 2k DTM Primer  
1 Part Activator 
Reduction of up to 10-15% with Urethane reducers

OPTIONAL MIX 4:1:1 as a SEALER (4 parts primer 1 part Activator, 1 part 2K reducer)

POT LIFE 1 Hour @ 70°F (20°C)

GUN SET UP:

Conventional
Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

HVLP
Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Air Pressures
Conventional
Siphon Feed: 35-45 psi at the gun
Gravity Feed: 30-40 psi at the gun
HVLP 8-10 psi at the gun

APPLICATION:

Clean surface thoroughly using accepted body shop procedures. Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe. Apply 2-3 medium coats of 2K DTM Primer with 10-15 minutes flash between coats. Do not apply more primer after 1 hour from completion.

FLASH TIME/DRY TIMES @ 72ºF / 22.2ºC:
Flash/Dry Times (Air Dry):
Flash Between Coats: 10-15 minutes
Wet Sanding: 1 hour
Dry Sanding: 1 hour
INFRA RED 15-20 minutes

Times can vary depending on the air temperature and air movement.

 
RE-COAT: Topcoat within 24 hours of sanding. If time exceeds 24 hours, the primed surface must be sanded and cleaned again prior to application of primer or topcoat.

SANDING: Dry & D.A.: P400—P600 Wet Sanding: P500—P600

2K DTM Primer Kit includes:

2K High Build Primer 1 Quart Kit:

• 1 Quart High Build Primer.
• 1/2  Pint Activator.
• 1/2 Pint 2K Reducer

2K High Build Primer 1 Gallon Kit:

• 1 Gallon 2K DTM High Build Primer.
• 1 Quart DTM Activator.
• 1 Quart 2K Reducer 

Description:

Base Pearlz have a massive depth of color and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl Luster!

Base Pearlz come in a wide range of colors. They can be simply topcoated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints Reducer and Mix 2-1

Base Pearlz Colors:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Novak Purple (Best used over White Base)
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base)
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Leave 60 minutes before applying effect color.
• Mix Base Pearlz 2-1 with Reducer and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics. They can be simply topcoated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints Reducer and Mix 2-1

Base Metallic Colors:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic DayDreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
  
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'

Base Metallic CANZ:

Base Metallic CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Base Metallics we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Metallics are easy to apply and can even be applied with an airbrush. Base Metallic colors can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.) We suggest a Light Grey or White Primer.
• Mix Base Metallic 2-1 with Reducer and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats.
• Apply our 2K Euro Show Clear for a Real Deep Gloss finish.

Activator Temperatures:

Very Slow: 95°F and above
Slow: 75°F - 90°F and above
Medium: 65°F - 80°F
Fast: 60°F - 70°F

Description:

2K Diamond Clear is a Premium High Solids Urethane Clear coat is a high solid clear coat formulated to provide easy application, easy polishing, and long pot life. 2K Diamond Clear offers an excellent high gloss finish, great flow and anti-sagging properties. 2K Diamond Clear is suitable for all top-quality overall, spot and panel finishes. This clear coat resists shrinkage and die back, and retains its glossy appearance whether baked or air-dried. And with advanced UV filters and absorbers, your finishes keep their beauty longer.

• Premium 2K Urethane Clear
• Excellent Hardness; Chemical Resistance & Flexibility

The mixing ratio:

• 2 parts Clear-coat
• 1 part Activator

2K Diamond Clear Kits:

1 Gallon 2K Diamond Clear Kit: Total Mix - 1.5 Gallons of Clear-coat.

• 1 Gallon Clear-coat.
• 2 Quarts Activator

1 Quart 2K Diamond Clear Kit: Total mix - 1.5 Quarts of Clear-coat.

• 1 Quart Clear-coat.
• 1 Pint Activator.

Application:

SURFACE PREPARATION:

EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.

FLASH / DRYING TIMES:

Dry and cure times are dependent on air movement, temperature and film builds.

RECOATING:

2K Diamond Clear may be repaired and recoated after 12-24 hours at 70° F/21° C. 2K Show Clear may be repaired and recoated when force dried after 1 hour cool down.

EQUIPMENT CLEANING:

Clean equipment immediately after use according to local regulations.

POLISHING:

Air Dry:             After 24 hours

Force Dry:           1 hours after cool down.

Sanding:             Use 2000 grit wet or finer. Or use 2000 DA or finer.

Compounding:  Use finishing compound. Apply a thin ribbon of material to the area to be polished. Use a double-sided wool polishing pad or a foam pad. Maintain air polisher or variable speed buffer at 1800-3000 rpm. Remove excess finishing compound with a clean, soft cloth prior to applying finishing polish.

Activator Temperatures:

Very Slow: 95°F and above
Slow: 75°F - 90°F and above
Medium: 65°F - 80°F
Fast: 60°F - 70°F

Description:

Euro Show Clear is a 3-1 Premium 2K Urethane Clear coat is a high solid clear coat formulated to provide easy application, easy polishing, and long pot life.

2K Euro Show Clear offers an excellent high gloss finish, great flow and anti-sagging properties.

2K Euro Show Clear is suitable for all top-quality overall, spot and panel finishes. This clear coat resists shrinkage and die back, and retains its glossy appearance whether baked or air-dried and with advanced UV filters and absorbers, your finishes keep their beauty longer.

2K Euro Show Clear Kits:

1 Gallon 2K Euro Show Clear Kit includes: 

• 1 x Gallon Euro Show Clear.
• 1 x Quart + 10.6oz Activator

1 Quart 2K Euro Show Clear Kit includes:

• 1 x Quart Clear-coat.
• 1 x 10.6oz Activator.

Substrates & Surface Preparation:

Use over Custom Paints Basecoats and sanded OEM finishes in good condition.

EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.

Application:

Apply 2-3 coats or 3-4 coats If a heavy flat and polishing is to be a expected. Ensure you leave longer flash times when applying more then 3 coats. 

The mixing ratio:

• 3 parts Clear-coat
• 1 part Activator (Medium or Slow Activators)
• Optional : 5 - 10% Thinner

POT LIFE AT 20°C (68°F):  60 -120 minutes

FLASH / DRYING TIMES:

 Dry and cure times are dependent on air movement, temperature and film builds.

EQUIPMENT CLEANING:

Clean equipment immediately after use according to local regulations.

Protection:

Use suitable respiratory protection (we recommend the use of a fresh air supply respirator).

Harley Davidson: Vivid Black - Paint Code A27220B (1996 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Holographic Metal Flake:

Our Holographic Metal Flakes are one of the finest flakes available. They shimmer through a rainbow of colors when viewed at different angles. Our Holographic Metal Flakes are solvent proof and wont fade in sunlight as they had a high UV coating on them. we have had 1000's of customers use our Holographic Metal Flakes and continue using us all the time. Apply our Holographic Metal Flakes over any base color to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Varnish and can also be used for Arts n Crafts.

The Holographic Metal Flakes are available in Medium (.008 Hex) and Large (.015 Hex).

The Holographic Metal Flake Color Range:

• SILVER HOLOGRAPHIC METAL FLAKE
• GOLD HOLOGRAPHIC METAL FLAKE
• BLUE HOLOGRAPHIC METAL FLAKE
• RED HOLOGRAPHIC METAL FLAKE
• ORANGE HOLOGRAPHIC METAL FLAKE
• PINK HOLOGRAPHIC METAL FLAKE
• GREEN HOLOGRAPHIC METAL FLAKE
• PURPLE HOLOGRAPHIC METAL FLAKE
• BLACK HOLOGRAPHIC METAL FLAKE
• SAPPHIRE HOLOGRAPHIC METAL FLAKE
• FUCHSIA HOLOGRAPHIC METAL FLAKE

Holographic Metal Flake Application:

Apply our Holographic Metal Flakes over any base color to produce a real custom effect but most customers use a black base coat. We recommend adding the Holographic Metal Flake to our Intercoat Clear base coat but you can add them to any Automotive solvent or water based Lacquer, Clear base coats and Varnish. Depending on how heavy you want the Holographic Metal Flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply Clear coat until the Holographic Metal Flake is fully covered and you have full Gloss.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.5 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.8 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Chromacoat shifting effect changes color right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Color shifting colorants. These are unique colorants that offers previously unattainable color performance, they actually change color depending on the angle from which they are viewed. More than just a subtle variation in shade, the color undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

For best performance use Custom Paints Reducer and Mix 2-1

Chromacoat Colors:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Chromacoat CANZ:

Our award winning Chromacoat is now available in an aerosol can. Chromacoat CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Chromacoat Application:

Chromacoat is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colors will give you a real custom effect. Chromacoat can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Chromacoat 2-1 with Reducer and stir well.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

JTape Brand Fine Line Masking Tapes

One of the Best Fine line tapes on the Market for Curved lines.

Green Fine Line Masking Tape Orange Fine Line Masking Tape uses a thermally stabilized PVC backing with a rubber based pressure sensitive adhesive. It is highly flexible, easy to curve and will hold and cleanly remove from surfaces in temperatures up to 132°C/270°F for at least 30 minutes. After de-masking, it will leave no residue and a sharp, clean separation line.

Description:

Candy Concentrate brings you the ultimate custom finish. Candy Concentrate is used to richen any of our Candy range. Candy Concentrate is perfect for motorcycles or small parts when speed is a factor.

Candy Concentrate is not generally recommended for exterior on over all Candy completes.

Candy Concentrate Colors:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
  
• Green Candy
  
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTV's PIMP MY RIDE UK for Series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

CANDY CANZ:

Custom Paints award winning Candy is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from CANDY CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K aerosol on the market!!!

Description:

Intercoat Clear can be used as a protective inter-coat. Intercoat Clear has excellent film build and adhesion, beautiful flow characteristics and superb leveling. It has minimum sag and good vertical stability which is so important when working with specialist additives and has been specially formulated as a carrier of Pearl powders and our Metal Flake range.

Application:

Our Inter-coat is easy to apply and can even be applied by a airbrush.

(Always spray test panels before spraying you product or project)

• Mix Intercoat 2-1 with Reducer and stir well. 
• add dry pearl or metal flake and stir well should you be using as a carrier. 
• Apply 1-3 coats Leave 10-15 minutes between coats. 
• Apply effect color or our 2K Show Clear for that high Gloss finish.

.

Description:

Liquid custom colors are used to produce color-changing paint (Flip Paint) finishes that range from very subtle to very dramatic. The color of the Basecoat applied under the Midcoat dramatically affects the final color and shift color. Dark colored Basecoats provide the most color change, with light colored Basecoats providing clear and sophisticated pastel and opalescent color shifts. Each Liquid custom product has the potential to produce an infinite number of color shift effects depending on Basecoat color selection.

For best performance use Custom Paints Reducer and Mix 2-1

Liquid Colors:

• Liquid Emerald - Shifts from Green to Blue
• Liquid Purple - Shifts from Purple to Red to Gold to Green

Liquid CANZ:

Our award winning Liquid is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Liquid CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Liquid Application:

Liquid coatings are easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat, but using different colors will give you a real custom effect. Liquid colors can also mixed with our other products Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc. to get a true custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Liquid 2-1 with Reducer and stir well.
• Apply 3-4 coats of Liquid depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2-3 coats of 2K Show Clear for a Real Deep Gloss finish.

Important Notice!! Outrageous coatings line have now been discontinued by the manufacturer. Custom Paints Inc have matched a lot of the Outrageous effect colors. When ordering this color, you will be receiving a Custom Paints Inc version. We do not sell Outrageous coatings. Pease contact us if you have any questions before ordering. We offer Premium Quality at Amazing Pricing!!

For best performance use Custom Paints Reducer and Mix 2-1

Outrageous Shock Waves Colors:

• Bondi Beaches ( Requires Blue Waves Base Coat )
  
• Daytona Beaches ( Requires Mint Base Coat )
  
• Key West ( Requires Blue Waves Base Coat )
  
• Miami Pink ( Requires Pink Base Coat )
  
• Purple Surfer ( Requires White Base Coat )
  
• Tobago Bay ( Requires Mint Base Coat )

Outrageous Shock Waves CANZ:

Outrageous Shock Waves is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Outrageous CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix Ground Coat 2-1 with Reducer and stir well.
• Apply 2-3 coats of Ground Coat leaving 10-15 minutes between coats. Leave 30 minutes before applying effect color.
• Mix Pearl Midcoat 2-1 with Reducer and stir well.
• Apply 2-4 coats of Midcoat depending on the effect you desire. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colors. Apply our Pearls over any Base color to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Pearl Colors:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Magenta Pearl
• Orange Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Pearl CANZ:

Our award winning Pearls are now available in a aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Pearl Application:

Pearls are easy to apply and can even be applied with an airbrush. Apply Pearls over any color Basecoat, but Pearl colors can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat.
• Mix Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Shimmer is a unique coating that has a tremendous sparkling effect in a bright light, but in normal light will give you a subtle metallic look. Shimmer is easily applied by normal spraying equipment but can also be sprayed with an airbrush. Apply Shimmer over any color Basecoat for novel effects, but also mixing different Shimmer colors will give you a real custom effect. Apply our Candy colors over the top of Shimmer to give a real "pop" to the Candy effect.

For best performance use Custom Paints Reducer and Mix 2-1

Shimmer Colors:

• Blue Shimmer
• Gold Shimmer
• Green Shimmer
• Purple Shimmer
• Red Shimmer
• Silver Shimmer

Shimmer Canz:

Our award winning Shimmer is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Shimmer CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Shimmer Application:

Shimmer is easy to apply and can even be applied with an airbrush. Apply Shimmer over any color Basecoat, but for great results use over a Black Basecoat. Shimmer colors can also mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying you product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Shimmer 2-1 with Reducer and stir well.
• Apply 2-5 WET coats of Shimmer depending on the effect you desire. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Lumo brings you the brightest custom paint finish. Lumo paint is a high visibility fluorescent coating in daylight and artificial light. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

For best performance use Custom Paints Reducer and Mix 2-1

Lumo Colors:

• Green Lumo
• Orange Lumo
• Pink Lumo
  
• Red Lumo
• Yellow Lumo

Lumo CANZ:

Our award winning Lumo is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Lumo CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Lumo Application:

Lumo coatings are easy to apply and can even be applied with an airbrush. For best results use a White Basecoat. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Lumo 2-1 with Reducer and stir well.
• Apply 3-6 coats of Lumo depending on the effect you desire, leaving 15 minutes between coats. 
• Apply 2K Show Clear HI-UV Clearcoat for a Real Deep Gloss finish. IMPORTANT: Ensure Clearcoat is fully dry before removing from spray booth. This is to ensure daylight doesn't shine on paint work until fully dry giving full protection to the Lumo coating.

Harley Davidson: Black Denim - Paint code S28664 (2006 onwards)

To match the color correctly, the Black Denim will require a 1k or 2k Matt Clearcoat to be applied over the top of the base color.

All colors will come as "Standard" Shade unless stated. Other shades available on request.

This color will dry to a dull finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Black Crystal - Paint Code PX8

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Ford: Shadow Black - Paint Code G1

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Ford: Tuxedo Black - Paint Code UH

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colors due to their large size and give a sparkle effect in bright light/sunlight. Sparkle Pearls are like no other pearls on the market as each color gives off colors within the color pearl. Apply Sparkle Pearls over any Basecoat color to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Sparkle Pearl Colors:

• Blue Sparkle Pearl
• Copper Sparkle Pearl
• Fire Gold Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Purple Sparkle Pearl
• Rainbow Sparkle Pearl
• Red Sparkle Pearl
• Silver Sparkle Pearl
• Super Copper Pearl
• Turquoise Sparkle Pearl
• Black Diamond Sparkle Pearl

Sparkle Pearl CANZ:

Our award winning Sparkle Pearl is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Sparkle Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Sparkle Pearl Application:

Sparkle Pearl is easy to apply and can even be applied with an airbrush. Apply Sparkle Pearl over any colored Basecoat. Sparkle Pearl colors can also be mixed with our other products: Candy, Spectracoat, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Sparkle Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Sparkle Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Harley Davidson: Big Blue Pearl - Paint code - 930849 (2012 - 2015)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Activator Temperatures:

Very Slow: 95°F and above
Slow: 75°F - 90°F and above
Medium: 65°F - 80°F
Fast: 60°F - 70°F

Description:

• Premium 2K Urethane Clear
• Excellent Hardness; Chemical Resistance & Flexibility

Mixing:

The mixing ratio:

• 2 parts Clear-coat
• 1 part Activator

2K Matte Clear Kits:

1 Gallon 2K Matte Clear Kit: Total Mix - 1.5 Gallons of Clear-coat.

• 1 Gallon Clear-coat.
• 2 Quarts Activator

1 Quart 2K Matte Clear Kit: Total mix - 1.5 Quarts of Clear-coat.

• 1 Quart Clear-coat.
• 1 Pint Activator.

GM: Black - Paint Code WA8555 

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Bright White - Paint Code PW7 (1999 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Nissan: Super Black - Paint Code KH3

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Granite Crystal - Paint Code PAU

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Brilliant Black Crystal - Paint Code PXR

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Ford: Carbonized Gray - Paint Code M7

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.