Custom Colors

2K CLEAR-COAT CANZ:

Specialist Paints brings you 2k Clear Coat in a aerosol can. The 2K aerosol is a brand new design unlike any other aerosol on the market, Its a better design then any other giving high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our 2K CLEAR CANZ can save on time & labor with no mixing or Spray gun cleaning. 2K CLEAR CANZ has good flow giving a great high gloss finish.

2K Clear-Coat CANZ is a great product for Vehicle spot repairs and small jobs that require High Gloss with strength and toughness of a Automotive Clear coat.

13.5oz 2K Clear-Coat CANZ Performance:

• 2-component technology (in-can activator system)
• High Gloss providing high scratch resistant
• Spray gun finish
• Quick Drying-time
• Excellent flow
• Easy polishing
• 24hr pot life
• Particularly suitable for Vehicle Spot Repair

APPLICATION:

• Remove Gray cap at base and insert metal ring provided in cap, Pull fully out and twist 360 degrees to release activator.
• Shake Custom Aerosol Can for 2-5 minutes.
• Apply 2-3 coats of Clear coat leaving 5-10 minutes between coats.  
• Drying time 30-60mins depending on temperature.
• infrared compatible
• Can be Mechanically polished after 24 Hrs
• After use turn Aerosol upside down and empty Valve, Pot life up to 24hrs at 20 Degrees C

Base Aerosol Can:

Kustom Kanz Basecoats provide superior coverage and are exceptionally easy to apply.

Can be used as a base for our custom range or just as they are.

Base Colors available:

• Black Base
• White Base
• Light Blue Base
• Sky Blue Base
• Light Green Base
• Mustard Base
• Light Purple Base
• Green Base
• Dark Blue Base
• Brown Base
• Pink Base
• Red Base
• Orange Base
• Lemon Base
• Mint Green Base
• Dark Red Base
• Light Grey
• Blue Waves

Application:

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the effect color or Clear-coat.
• For best results we suggest to apply our 2K Clear-coat Aerosol KUSTOM CANZ

Kustom Canz 1K Primer:

Kustom Can 1k Primer is a premium primer-surfacer for fast spot priming providing a smooth pin hole free surface easily sanded. Can be used directly onto many difficult substrates including alloy, stainless steel, zintec and galvanize. 

Kustom Can 1k Primer is available in 3 colors: White, Gray and Black

13.5oz 1K Primer Performance:

• Excellent adhesion and anti-corrosive properties
• Quick Drying-time
• Spray gun finish
• Excellent smooth surface finish
• Particularly suitable for Vehicle Spot Repair
• Available in 3 colors: White, Gray and Black

APPLICATION:

• Remove all rust from metal surfaces.
• Clean surface with a suitable degreaser then abrade
• Areas to be sprayed must be free of grease, dust and dry
• Shake aerosol can for at least two minutes, after agitator ball is free
• Carry out test spray before spraying your project.
  
• Apply 1-2 coats wet coats,
• leave 10-15 minutes between coats.  
• Drying time 30-60mins @ 20`C, 
• 3 Minutes infrared.
• After use, turn aerosol can upside down and spray to clear the valve.

Alien-Glow CANZ:

Alien-Glow Colors:

Alien-Glow is a glow in the dark Paint. This is clearly the best Glow in the Dark paint available with outstanding after glow of up to 24 hrs.

There are 2 Alien-Glow colors:

• Blue
• Green

Application:

Alien-Glow coatings are easy to apply and for best results use a White base coat.

(Always spray test panels before spraying you product or project)

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Alien Glow effect color.
• Apply 3-5 wet coats depending on the Alien-Glow effect you desire. Leave 5-10 minutes between coats.
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness; Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS; ABS; ABS/PC; PC; PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive; Electronics; Household Goods etc
• Used as base coat under 1 & 2 component Clear coats including Ultra Violet Cured
• Suitable for use with Cubic Printing Process