Bentley: Extreme Silver - Paint Code 9560195 (2010 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Alpine Green Metallic - Paint Code 6608

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Silverlake Metallic - Paint Code 6501/LK5R

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Kingfisher (2010 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Orange Flame - Paint Code 6201 (2005 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Old English White - Paint Code 6964

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Aquamarine - Paint Code: LK6R or 9560153 (2007 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Silver Tempest Metallic - Paint Code 6702/K7S

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Rose Gold Metallic - Paint Code 6842

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: White Sand - Paint Code LK1V

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Porcelain - Paint code 6517

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Monaco Yellow - Paint Code 6103 (2013 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Dragon Red - Paint Code 6356 (2010 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Moonbeam Metallic - Paint Code 6714/A7W

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Meteor Metallic - Paint Code 6504/LK5L

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Burgundy Pearl - Paint Code 6303

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Apple Green Metallic - Paint Code 6628

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Sequin Blue - Paint Code 6523

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Peacock Metallic - Paint Code 6506

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Neptune Metallic - Paint Code 6502/LK5W

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Black Crystal - Paint Code 6923

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Cumbrian Green - Paint Code LK6W

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Havanna - Paint Code LK8W

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Black Velvet Pearl - Paint Code 6904

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Black Sapphire - Paint Code 6905

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Dove Grey - Paint Code 6767

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Moroccan Blue Metallic - Paint Code 6505

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Claret Mica - Paint Code 6322

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Sunburst Gold - Paint Code 6108/O1F

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Storm Grey Paint code 6704

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Breeze - Paint code 6776

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Damson - Paint code 6410

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Magnetic (2012 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Volcanic Black - Paint Code 9560229 (2015 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

This product is a 3 stage application and will come with the Base color and Mid color 

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Ghost White - Paint Code 6919 (2007 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

This product is a 3 stage application and will come with the Base color and Mid color 

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: St James Red - Paint Code 6331 (2010 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

This product is a 3 stage application and will come with the Base color and Mid color 

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Magnetic (2012 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Magenta - Paint Code 6408 (2012 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Bentayga Bronze (2015 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Automotive Colors

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer and will require a 2K Clear coat.

Colors will dry to a flat finish and will require a 2K Clear coat.

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure it's fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.