Audi: Oolong Grey - Paint Code LX7U

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Orca Black Metallic - Paint Code: LC9X (2016 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Paradiesgruen - Paint Code LY6K

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Pebble Grey - Paint Code LA7C

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Pulse Orange - Paint Code LY2H

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Samoa Orange - Paint Code LX2U

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Scuba Blue - Paint Code LX5Q

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Sepang Blue - Paint Code LY5Q

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Soho Brown - Paint Code LY8R

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Solar Orange - Paint Code LY2G

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Sonoma Green - Paint Code LX6R

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Suzuka Grey - Paint Code: LX7N (2010 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Tactical Green - Paint Code LX6C

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Tamarind Brown - Paint Code LD8S

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Tango Red - Paint code LY3U

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Tornado Grey - Paint Code LX7P

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Vegas Yellow - Paint Code LZ1A

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Vicuna Beige - Paint Code LL1X

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Vogue Red Metallic - Paint Code: LY3R (2016 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Audi: Volcano Red - Paint Code LY3M

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Automotive Aerosol Cans

High Teck Aerosol cans

SEM Aerosol cans

Spray Max Aerosol cans

Automotive Finishes

Matrix Automotive Finishes: MS-42 Premium High Solids Urethane Clearcoat

MS-42 Premium High Solids Urethane Clearcoat is a high solid clearcoat formulated to provide easy application and easy polishing. MS-42 offers an excellent high gloss finish, great flow and vertical stability properties.

1.COMPONENTS:

• MS-42  Premium High Solids Urethane Clearcoat
• MH-43  Premium Hardener 
• MH-005  Normal Premium Hardener
• MH-006  Slow Premium Hardener
• MH-008  Very Slow Premium Hardener

2.  MIXING RATIO (2:1) • Mix two (2) parts MS-42 Premium High Solids Urethane Clearcoat with    one (1) part MH-Series Urethane Hardeners.

3.  POT LIFE @ 77°F (25°C) • Sprayable 30-60 minutes *NOTE: Pot life will shorten as temperatures increase. Matrix System products are not recommended for use in temperatures below 65°F

Matrix Automotive Finishes: 

MS-52 Universal Urethane Clearcoat is a high gloss, 4:1 mix clearcoat. MS-52 Universal Urethane Clearcoat is easy to use making it an excellent value for body shops under various conditions.

1.COMPONENTS:

• MS-42  Premium High Solids Urethane Clearcoat
• MH-43   Spot & Panel
• MH-005  Normal Premium Hardener
• MH-006  Slow Premium Hardener
• MH-008  Very Slow Premium Hardener

2.  MIXING RATIO (4:1)

Mix four (4) parts MS-52 Universal Urethane Clearcoat with one (1) part MH-Series Urethane Hardeners.

3.  POT LIFE @ 77°F (25°C)

Sprayable 30-60 minutes.  NOTE: Pot life will shorten as temperatures increase. Matrix Edge™ System products are not recommended for use when panel temperature is below 60°F.

Evercoat 100709 – Slick Sand Polyester Primer Surfacer.

A high-solids, extra high-build polyester-based primer surfacer that offers excellent adhesion to metal, galvanized metal, aluminum, wood, fiberglass, SMC, and body filler. Ideally suited for large uneven surfaces. MEKP activator included. All bare metals must be treated with a high-quality epoxy primer prior to the application of Slick Sand.

Matrix Automotive Finishes: 

Matrix MP-121 2K Primer/Sealer White Gallon
Matrix MP-121 Sealer has been designed for “wet on wet” applications. These exceptional sealers provide excellent flow, leveling and topcoat holdout in addition to offering medium film build for filling minor surface imperfections. 

Mix 4:1 with MA-122 Activator

BASE COLOR ESSENTIALS

Description:

Chris Johnson is an accomplished custom airbrush artist, painter, fabricator and illustrator. Chris’s kit represents the classic oil paint colors essential to the masters for centuries.

Kit includes 10 x 100mL Bottles:

• Burnt Sienna
  
• Deep Blue
• Magenta
• Olive Green
• Paynes Gray
• Phthalo Green
• Purple
• Raw Umber
• Teal
• Reducer

Inspire Airbrush Kits:

Inspire Airbrush Base Kit includes 10 Colors

BASE COLORS: Black Base, Dark Blue Base, Dark Red Base, Flesh Tone Base, Green Base, Lemon Base, Mustard Base, Orange Base, Red Base, White Base

Inspire Airbrush Candy Kit includes 10 Colors

CANDY COLORS: Black Candy, Blue Candy, Brown Candy, Cherry Red Candy, Emerald Candy, Fools Gold Candy, Gold Candy, Orange Candy, Red Candy, Ruby Red Candy

Inspire Airbrush Sparkle Pearl Kit includes 8 Colors

SPARKLE PEARL COLORS: Blue Sparkle Pearl, Copper Sparkle Pearl, Gold Sparkle Pearl, Green Sparkle Pearl, Purple Sparkle Pearl, Red Sparkle Pearl, Silver Sparkle Pearl, Turquoise Sparkle Pearl 

Description:

Our High Performance Base Colors are intermixable to create thousands of base colors. Base Colors can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

For best performance use Custom Paints Reducer and Mix 2-1

Base Colors:

• Black Base 
• Blue Lagoon Base
• Blue Waves Base
• Brown Base
• Clearwater Base
• Cotton Candy Base
• Dark Blue Base
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base
• Green Base
• Lemon Base
• Lemon Drop Base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Lilac Base
• Mint Green Base
• Mustard Base
• Orange Base
• Peppermint Base
• Pink Base
• Red Base
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base
• Slime Green Base
• White Base
• Yellow Ochre Base

Base CANZ:

Our Base Colors are now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Base CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Colors are easy to apply and can even be applied with an airbrush.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix Basecoat 2-1 with Reducer and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats. 
• Apply any effect color or 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics. They can be simply topcoated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints Reducer and Mix 2-1

Base Metallic Colors:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic DayDreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
  
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'

Base Metallic CANZ:

Base Metallic CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Base Metallics we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Metallics are easy to apply and can even be applied with an airbrush. Base Metallic colors can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.) We suggest a Light Grey or White Primer.
• Mix Base Metallic 2-1 with Reducer and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats.
• Apply our 2K Euro Show Clear for a Real Deep Gloss finish.

Description:

Base Pearlz have a massive depth of color and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl Luster!

Base Pearlz come in a wide range of colors. They can be simply topcoated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints Reducer and Mix 2-1

Base Pearlz Colors:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Novak Purple (Best used over White Base)
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base)
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Leave 60 minutes before applying effect color.
• Mix Base Pearlz 2-1 with Reducer and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a Real Deep Gloss finish.

Bentley: Alpine Green Metallic - Paint Code 6608

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Apple Green Metallic - Paint Code 6628

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Aquamarine - Paint Code: LK6R or 9560153 (2007 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Bentayga Bronze (2015 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Black Crystal - Paint Code 6923

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Black Sapphire - Paint Code 6905

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Black Velvet Pearl - Paint Code 6904

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Breeze - Paint code 6776

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Burgundy Pearl - Paint Code 6303

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Automotive Colors

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer and will require a 2K Clear coat.

Colors will dry to a flat finish and will require a 2K Clear coat.

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure it's fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Claret Mica - Paint Code 6322

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Cumbrian Green - Paint Code LK6W

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Damson - Paint code 6410

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Dove Grey - Paint Code 6767

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Dragon Red - Paint Code 6356 (2010 onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.