Inspire Airbrush Micro Shimmer
Description:
Our Micro Shimmer is a unique coating that has a tremendous sparkling effect in a bright light, but in normal light will give you a subtle metallic look. Shimmer is easily applied by normal spraying equipment but can also be sprayed with an airbrush. Apply Shimmer over any color Basecoat for novel effects, but also mixing different Shimmer colors will give you a real custom effect. Apply our Candy colors over the top of Shimmer to give a real "pop" to the Candy effect.
The Inspire Airbrush range is twice the strength as our Custom Paint range. This is to help reduce the amount of coats needed for the airbrush artist. All colors come ready to use.
Micro Shimmer Colors:
- Blue Micro Shimmer
- Gold Micro Shimmer
- Green Micro Shimmer
- Purple Micro Shimmer
- Red Micro Shimmer
- Silver Micro Shimmer
Application:
- Always spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Black Basecoat leaving 10-15 minutes between coats.
- Apply 2-5 coats of Micro Shimmer depending on the effect you desire. Leave 10-15 minutes between coats.
- Apply 2K Show Clear for a Real Deep Gloss finish.
Metal Flake Application: "Dry Flake"
Apply our Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.
Always spray test panels before spraying you product or project to see the effect you desire.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Base coat.
- Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
- Apply the 1 - 5 coats of Metal Flake until you get the effect you desire.
- Apply a Clearcoat until the Metal Flake is fully covered.
Metal Flake Fx Application: "Paint"
METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.
- Always spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
- Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
- Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
- Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully
- Leave 60 minutes before applying a 2k Clearcoat.