Rainbow XL Colors

$45.00
/

Description:

Rainbow XL are based on a unique pigment that sparkles and shimmers through the light spectrum when viewed from different angles. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Rainbow XL.

For best performance use Custom Paints Reducer and Mix 2-1

Rainbow XL Colors:

  • Fuchsia
  • Gold
  • Green 
  • Pink
  • Red
  • Sapphire
  • Silver
  • Starlight
  • Violet
  • Twisted Lemon

Rainbow XL CANZ:

Our award winning Rainbow XL is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Rainbow XL CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Rainbow XL Application:

Rainbow XL is easy to apply and can even be applied with an airbrush. For best results use a Black, Silver or Gold Basecoat but using different colors will give you a real custom effect. Rainbow XL colors can also mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

  • Always spray test panels before spraying your product or project.
  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
  • Mix Rainbow XL 2-1 with Reducer and stir well.
  • Apply 2-4 coats of Rainbow XL depending on the effect you desire. Leave 10-15 minutes between coats. 
  • Apply our 2K Show Clear for a Real Deep Gloss finish.

Metal Flake Application: "Dry Flake"

Apply our  Metal Flakes over any base color to produce a real custom effect, most customers use a black Basecoat. We recommend adding the Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Base coat.
  • Add 5g to 100g of Dry Metal Flake to a Clear base coat or lacquer and stir well.
  • Apply the 1 - 5 coats of Metal Flake until you get the effect you desire. 
  • Apply a Clearcoat until the Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

  • Always spray test panels before spraying your product or project.
  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
  • Leave 60 minutes before applying the effect color to ensure basecoat is fully dry.
  • Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
  • Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
  • Leave 60 minutes before applying a 2k Clearcoat.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed