High Teck Single Edge Razor Blades:

High Teck™ single edge razor blades are an excellent choice for shop operations.

Primarily used for applications like paint removal, removal of tape, adhesives and other materials from hard surfaces as well as cutting and trimming.

• Each blade wrapped in shelling paper for edge protection
• Aluminum back
• Convenient, resealable storage box
• 100 Blades per pack

High Teck 77062 Lightweight "Gray" Body Filler: 

High Teck 77062 Lightweight Body Filler is a tack-free, fine-sanding filler designed to reduce sandpaper clogging. Offers superior adhesion on all types of metal including galvanized, bare steel and aluminum.

Cream hardener is included.

Matrix MP-810 Plastic Adhesion Promoter: 

MP-810 Plastic adhesion promoter is designed to promote adhesion on commonly used automotive interior and exterior plastics including Thermopolyolefin (TPO), Polyvinyl Chloride (PVC), Reaction Injection Molded Polyurethane (RIM) and Polypropylene (PPO). 

MIXING RATIO • Ready to Use

APPLICATION • Spray one (1) medium coat allowing minimum flash of five (5) minutes, maximum flash of 20 minutes before applying sealer or topcoat NOTE:  Do not spray when surface temperature is below 60°F (15°C)

Matrix Automotive Finishes: 

Matrix MP-121 2K Primer/Sealer White Gallon
Matrix MP-121 Sealer has been designed for “wet on wet” applications. These exceptional sealers provide excellent flow, leveling and topcoat holdout in addition to offering medium film build for filling minor surface imperfections. 

Mix 4:1 with MA-122 Activator

Matrix Automotive Finishes: 

MS-52 Universal Urethane Clearcoat is a high gloss, 4:1 mix clearcoat. MS-52 Universal Urethane Clearcoat is easy to use making it an excellent value for body shops under various conditions.

1.COMPONENTS:

• MS-42  Premium High Solids Urethane Clearcoat
• MH-43   Spot & Panel
• MH-005  Normal Premium Hardener
• MH-006  Slow Premium Hardener
• MH-008  Very Slow Premium Hardener

2.  MIXING RATIO (4:1)

Mix four (4) parts MS-52 Universal Urethane Clearcoat with one (1) part MH-Series Urethane Hardeners.

3.  POT LIFE @ 77°F (25°C)

Sprayable 30-60 minutes.  NOTE: Pot life will shorten as temperatures increase. Matrix Edge™ System products are not recommended for use when panel temperature is below 60°F.

Matrix Automotive Finishes: MS-42 Premium High Solids Urethane Clearcoat

MS-42 Premium High Solids Urethane Clearcoat is a high solid clearcoat formulated to provide easy application and easy polishing. MS-42 offers an excellent high gloss finish, great flow and vertical stability properties.

1.COMPONENTS:

• MS-42  Premium High Solids Urethane Clearcoat
• MH-43  Premium Hardener 
• MH-005  Normal Premium Hardener
• MH-006  Slow Premium Hardener
• MH-008  Very Slow Premium Hardener

2.  MIXING RATIO (2:1) • Mix two (2) parts MS-42 Premium High Solids Urethane Clearcoat with    one (1) part MH-Series Urethane Hardeners.

3.  POT LIFE @ 77°F (25°C) • Sprayable 30-60 minutes *NOTE: Pot life will shorten as temperatures increase. Matrix System products are not recommended for use in temperatures below 65°F

Matrix Automotive Finishes: MS-42 Premium High Solids Urethane Clearcoat

MS-42 Premium High Solids Urethane Clearcoat is a high solid clearcoat formulated to provide easy application and easy polishing. MS-42 offers an excellent high gloss finish, great flow and vertical stability properties.

1.COMPONENTS:

• MS-42  Premium High Solids Urethane Clearcoat
• MH-43  Premium Hardener 
• MH-005  Normal Premium Hardener
• MH-006  Slow Premium Hardener
• MH-008  Very Slow Premium Hardener

2.  MIXING RATIO (2:1) • Mix two (2) parts MS-42 Premium High Solids Urethane Clearcoat with    one (1) part MH-Series Urethane Hardeners.

3.  POT LIFE @ 77°F (25°C) • Sprayable 30-60 minutes *NOTE: Pot life will shorten as temperatures increase. Matrix System products are not recommended for use in temperatures below 65°F

Aston Martin: ONYX BLACK - Paint code 1353D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: VIRIDIAN GREEN - Paint code 1666

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: JET BLACK - Paint code 1328D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: SKYFALL SILVER MET. - Paint code 5149D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: SILVER FOX GREY - Paint code 5131H

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: GREY BULL - Paint code 5130H

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: MADAGASCAR - Paint code 517D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: HAMMERHEAD SILVER - Paint code 5121H

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: TUNGSTEN SILVER - Paint code 5119H

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: SILVER BLONDE - Paint code 5079D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: QUANTUM SILVER MET. - Paint code 5073D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: TORO RED - Paint code 1302D (2005-2007)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: ASTON GREEN - Paint code 1117D (2005)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: VERTIGO BLUE - Paint code 1301D (2003-2005)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: BERWICK BRONZE - Paint Code 1271D (2002-2007)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: PENTLAND GREEN - Paint code 1113D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Aston Martin: ALMOND GREEN - Paint code 1140

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors are mixed 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

3M™ acrylic plus high bond tape features two adhesives, one on each side of an acrylic foam core, designed for robust performance to a range of automotive surfaces. Foam core provides stress relaxation when exposed to high application loads, while maintaining tight bond line aesthetics under normal conditions. A removable liner is silicone-coated on both sides for easy release and application.

06388 - 3M Premium Automotive Attachment Tape, 20 yd x 1/2 in, 1.12 mm THK, Black

06387 - 3M Acrylic Plus High-Bond Tape A x 1/4 in, 1.12 mm THK, Black

Mercedes-Benz: Car Colors

This color will dry to a flat finish and will require a 2K Clear coat.

All automotive paint colors require mixing 1-1 with Reducer.

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure it's fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Ferrari: Rossa Corsa - Paint Code 229120

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

GM: White Diamond - Paint Code GBN

Important: This is a 3 stage color and application. All 3 stage colors will include the Base coat color and Mid coat color.

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

Cant find your color?

Please contact us, supplying the name and paint code of the color you require. 

Paint Application

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

GM: Red Jewel - Paint Code GAQ

Important: This is a 3 stage color and application. All 3 stage colors will include the Base coat color and Mid coat color.

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

Cant find your color?

Please contact us, supplying the name and paint code of the color you require. 

Paint Application

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Porsche: Black - Paint Code 6013

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Ferrari: Grigio Scuro - Paint Code 792

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Ferrari: Grigio Alloy Metallic - Paint Code 750

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Detonator Yellow - Paint Code PYB

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Hot Tamale - Paint Code PRR ('23 Onwards)

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Case IH Red - Paint Code P61

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Republic Blue - Paint Code P49

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: Q Ball - Paint Code PAH

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Chrysler: New Holland Blue - Paint Code P72

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW: Sparkling Copper Pearl - Paint Code C55

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW: Galvanic Gold Metallic - Paint Code C1P

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying the Clearcoat.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Place can(s) on a paint shaker or ensure the paint is fully stirred before reducing. 
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes flash time between coats.
• Leave 45-60 minutes to ensure its fully flashed off before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-4 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW: Ametrin Metallic - Paint Code X1B

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW: Blue Bay Lagoon Metallic - Paint Code C5L

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW: Misano Blue - Paint Code C1D

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW: Storm Bay Metallic - Paint Code C3N

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Moonbeam Metallic - Paint Code 6714/A7W

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Meteor Metallic - Paint Code 6504/LK5L

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Burgundy Pearl - Paint Code 6303

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Apple Green Metallic - Paint Code 6628

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Sequin Blue - Paint Code 6523

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Bentley: Peacock Metallic - Paint Code 6506

All colors will come as "Standard" Shade unless stated. Other shades available on request.

All automotive paint colors require mixing 1-1 with Reducer.

This color will dry to a flat finish and will require a 2K Clear coat. 

1000's of other colors available, Please contact us with the name and paint code of the color you require, if you can not see your color listed.

Paint Application

Application for 2 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colors:

• Always check color and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats.
• Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.